Przedłużanie rzęs
Klej do rzęs
Kępki i paski
Narzędzia i opakowanie
Pielęgnacyjny i magnetyczny
Współpraca
Język
Darmowe próbkiAdhesive formulated and filled in Pingdu, from 0.3 second salon glue to cluster and strip adhesive for retail. Two product lines, separate formulas, one MSDS per lot.
Production, inspection and packing happen in the same building, so a spec change is a conversation with the person who schedules the line.
0.3s, 0.5jest wrażliwy, 1s, 2s and UV. Judged on cure speed and retention.
Klej klastrowy, bond and seal, strip glue and DIY remover. Judged on days of wear and easy removal.
Chłopi, foka, elementarz, zmywacz do żeli i kremów, foam shampoo.
| Product | Cure | Retention | Pack |
|---|---|---|---|
| Fast 0.3s | 0.3 Do 0.5 s | 6 Do 8 tygodnie | 5 ml |
| Sensitive 0.5s | 0.5 Do 1 s | 4 Do 6 tygodnie | 5 ml |
| Medium 1s | 1 Do 2 s | 4 Do 6 tygodnie | 5 ml |
| Slow 2s | 2 Do 3 s | 3 Do 5 tygodnie | 5 ml |
| UV | 1 Do 2 s under lamp | 4 Do 6 tygodnie | 5 ml |
| Klej klastrowy | 5 Do 10 s | 5 Do 7 days | 3 Do 5 ml |
Send the five lines: product, spec, colour or formula, ilość, miejsce docelowe. A photo or sample is enough to start if you do not have a written spec.
| Item | Terms |
|---|---|
| MOQ | 100 pieces or bottles per style |
| Stock lines | 3 Do 7 dni robocze |
| Custom run | 10 Do 15 dni robocze po złożeniu depozytu |
| Printed packaging | From a $500 zamówienie, adds 1 Do 3 tygodnie |
| Próbki | Free pieces, pokrywasz kuriera |
| Dokumenty | Rejestracja FDA, SGS, ROHS, MSDS |
| Payment | Tylko USD, 30% deposit, 70% przed wysyłką |
Artists who work at a steady pace and control humidity in the room. Best for salons running six or more sets a day, where the glue has to keep up with the hands.
Beginners still learning isolation, and studios without a hygrometer. A fast glue in a dry room cures before the fan is placed, and the set looks uneven by day three.
Ask for the batch and the production date before ordering a case. Adhesive loses a third of its rated speed after six months in a warm warehouse.
Every batch is mixed in a temperature-controlled room, rested, then checked at the bench. We log room temperature and relative humidity at mixing time, because both move the cure speed more than the formula does. A batch that tests well at 25 degrees and 50 percent humidity behaves differently in a client room at 30 degrees and 80 percent, and the buyer needs to know which number they are holding.
Viscosity is measured with a flow cup, cure is timed on a synthetic lash under a stopwatch, and retention is checked on mannequin heads held for a week. The retention test is the one that matters, because the first two can pass while the third fails if the batch was contaminated at filling.
Checked against the retained sample from the same lot, not a target number on paper.
Placement is simulated at the humidity of the destination market.
Ten fans per head, counted at day one and day seven, no touch-ups.
Cure speed, kolor, viscosity and bottle size are the four inputs that change the price. Frontal glue for classic work usually sits at a longer cure than volume glue, and a buyer moving from a fast product to a slower one will see retention rise in humid rooms and fall in dry ones. Tell us the market and the average room conditions and the recommendation will follow.
Our medium-cure adhesive is the usual starting point for a mixed service menu, and the fast-cure line suits volume work in dry climates. The full factory picture sits on the lash manufacturer page.
Tak, as separate formulas. They fail for different reasons and should not share one spec.
A glue that cures before placement bonds to the wrong lash. A glue that never fully cures loses retention in week two.
Most sit at 45 Do 60 percent RH. Outside that range cure speed changes, so tell us the room.
Tak, from 100 butelki, with batch and expiry fields.
One per lot, powiązany z wysłaną partią.
Tak, and the MSDS documents the composition.
Six months unopened, four to six weeks after opening.
Send the product, market and quantity through the contact page.
Tell us the product and quantity. Quote, lead time and sample plan come back within one working day.