کارخانه مژه و چسب در پینگدو، چین. حداقل ۱۰۰ عدد در هر مدل.

کارخانه مژه · Pingdu

اکستنشن مژه

چسب مژه

خوشه‌ای و نواری

Tools and packaging

Care and magnetic

همکاری با ما

کارخانه وبلاگ تماس

زبان

نمونه رایگان

tina@rylash.com · +86 185 5320 5621

Lash factory · Pingdu, Shandong

Ellipse lashes with an oval base

Ellipse lashes in 0.15 to 0.20 mm with an oval cross-section, which presses onto the natural lash and holds a wider contact area. Made in Pingdu to your curl and length mix.

0.15–0.20Mm diameter
8–14Mm length
C–DCurl
100Pieces MOQ
Ellipse Lash Factory
What we make

Produced on our own line

Oval base

Wider contact

The base presses flat against the lash instead of rocking on a point.

Softer tip

Natural finish

Tapered tip so the set reads soft on camera.

Consistent curl

Held per batch

Heat-set and compared against a master tray.

Specification

What the floor runs

ParameterRangeNotes
Diameter0.15 to 0.20 mmOval cross-section
Length8 to 14 mmSingle or mixed tray
CurlC, CC, DJ on request
Tray12 or 16 lineFoil or clear
Terms

Minimum, lead time, packing

ItemTerms
MOQ100 pieces per style
Stock lines3 to 7 working days
Custom run10 to 15 working days after deposit
Printed packagingFrom a $500 order, adds 1 to 3 weeks
SamplesFree pieces, you cover the courier
DocumentsFDA registration, SGS, ROHS, MSDS
PaymentUSD only, 30% deposit, 70% before shipment
Fit and limits

Who this line suits, and who should skip it

Suits

Salons and brands that already know the curl and diameter their artists work with, and need a tray that repeats exactly from order to order.

Skip it if

Buyers still testing the market. Order a mixed tray first: a full case of one length tells you nothing about which lengths your clients actually use.

Check before ordering

Compare the curl against a tray you already trust, not against a photo. Curl codes are conventions, and two factories can label the same CC differently.

On the floor

Ellipse is about softness, not coverage

Ellipse fibre has a tapered, flattened section that gives a softer edge than flat lash and more coverage than round. It suits a client who wants a natural set with a bit more presence, and it is the line most often chosen for bridal work where the look has to survive photographs.

Because the section is thin at the tip, ellipse is more sensitive to handling than round fibre. We check tip integrity after the tray is packed and again on the retained sample, since a tip that frays in transit produces a set that looks fuzzy rather than feathered.

Tip

Integrity check

Frayed tips rejected at packing and on the retained sample.

Section

Tapered flat

Profile measured against a gauge.

Curl

Holds with less weight

Tested on a mannequin for a week.

Before it ships

Where ellipse earns its price

Ellipse costs more than round fibre and less than a full flat line. It earns the difference in close-up work, bridal and editorial, where the lash edge is visible. For a high-volume studio selling a standard set, round fibre remains the better margin.

The ellipse product page carries diameters and lengths, and the factory overview explains the fibre sourcing.

Questions

Factory questions

Is ellipse the same as flat?

Both widen contact, but the cross-section differs. Send a sample and we will match what you already sell.

Which is better for fine lashes?

Ellipse, because the oval base presses without slipping.

Can I get mixed lengths?

Yes, with the ratio on the spec.

What is the MOQ?

100 pieces per style.

Can you match my current tray?

Send a sample or clear photos and we will produce a counter-sample.

How do I start?

Send the spec through the contact page.

Send a spec, get price and date

Tell us the style and quantity. Quote, lead time and sample plan come back within one working day.

  • Quote within 24 hours
  • MOQ 100 per style
  • Bulk in 10 to 15 working days
  • FDA, SGS, ROHS, MSDS on file
بازگشت به بالا
Need a sample pack? Message our export team on WhatsApp.