Фабрика вій і клею в Пінду, Китай. Мінімум 100 на модель.

Фабрика вій · Пінду

Нарощування вій

Клей для вій

Пучки та смуги

Інструменти та упаковка

Догляд і магніт

Співпраця

Фабрика Блог Контакти

Мова

Безкоштовні зразки

Тіна@rylash.com · +86 185 5320 5621

Product · Fast cure lash adhesive

0.3 second lash glue

Cures in 0.3 до 0.5 seconds for artists who place a fan and move on. Not for beginners: placement has to be decided before the glue touches the lash.

0.3–0.5sCure
45–60%Humidity
6–8Weeks retention
5 mlBottle
0.3 Second Lash Glue
What it is

How it behaves in the room

Fast cure

No waiting

The bond sets almost on contact, which suits artists working at speed.

Lot tested

Every batch

A retained sample per lot, tied to the batch code on the bottle.

Humidity printed

On the label

Outside the range, cure speed changes.

Specification

Spec sheet

SpecValueNote
Cure0.3 до 0.5 sExperienced artists
Humidity45 до 60% RHPrinted on bottle
Retention6 до 8 тижнівWith aftercare
Pack5 ml sealedBatch and expiry

MOQ 100 bottles or tubes. Bulk 10 до 15 робочих днів після депозиту. MSDS per lot, batch and expiry printed.

Fit and limits

Who this line suits, and who should skip it

Suits

Artists who work at a steady pace and control humidity in the room. Best for salons running six or more sets a day, where the glue has to keep up with the hands.

Skip it if

Beginners still learning isolation, and studios without a hygrometer. A fast glue in a dry room cures before the fan is placed, and the set looks uneven by day three.

Check before ordering

Ask for the batch and the production date before ordering a case. Adhesive loses a third of its rated speed after six months in a warm warehouse.

Field notes

Field notes from artists who use it daily

Cure speed is not a quality grade. A 0.3 second glue is a tool for a specific rhythm: isolate, decide, place, move on. Artists who hesitate lose the placement window and the fan bonds to the neighbouring lash. That is why the same bottle produces clean sets in one studio and messy sets in another, and why we ask about the artist before we recommend a speed.

Humidity moves the real cure time more than the label does. At 45 до 60 percent relative humidity the bottle behaves as rated. Above 65 percent it grabs almost instantly and the bond can set before the base is seated. Below 40 percent it stays tacky long enough that the fan slides. A cheap hygrometer on the trolley is worth more than a faster glue.

Temperature matters at the bottle, not the room. Glue left in a warm drawer thins out and floods the dot; glue kept cold is thick and dispenses unevenly. Let the bottle sit at room temperature for an hour before a shift, keep it upright, and cap it between clients. Half of the "bad batch" complaints we receive trace back to storage, not chemistry.

Does it work for volume sets?

так, provided the fans are built before the glue is applied. Volume work with a fast glue rewards artists who pre-build; it punishes building on the lash.

How much should I use per lash?

A dot roughly the width of the lash base. More glue does not add hold, it adds cure time on the surface and a visible node.

What is the shelf life once opened?

Four to six weeks in a capped bottle at room temperature. Write the opening date on the bottle and replace it on schedule.

Питання

Питання покупця

Who should use it?

Artists who already place fans at speed. Beginners lose placement control.

What happens in high humidity?

It cures faster than labelled, shortening placement time.

Retention?

Six to eight weeks with clean lashes.

Do you supply MSDS?

One per lot, tied to the batch.

How do I order?

Send quantity through the contact page; MOQ 100 пляшки.

Send a formula spec, get price and date

Tell us the cure speed, market and quantity. Quote and sample come back within one working day.

  • Quote within 24 години
  • MOQ 100 пляшки
  • MSDS per lot
  • FDA, SGS, ROHS on file
Вгору
Потрібна упаковка зразків? Надішліть повідомлення нашій команді експорту в WhatsApp.